Faculty Members
Dr. Akhil Khajuria
Assistant Professor
Post Doc, Ph.D, M.Tech, B.Tech
Area of Interest
Welding metallurgy, WAAM, Creep of materials, Bio-composites, Electron microscopy
Majors Degrees
-
Ph.D.
Professional Experience
Research Papers
-
‘The influence of CMT-MAG and MAG welding-processes on microstructure and mechanical behaviour of C-Mn E410 structural-steels’, International Journal of Structural Integrity, Emerald, ISSN: 1757-9864, (Accepted for publication), Jan 2024, SCOPUS/ ESCI/WOS/Q2. DOI- 10.1108/IJSI-12-2023-0141
-
‘The synergistic effects of boron and impression creep testing during paced controlling of temperature for P91 steels’, Advanced Engineering Materials, Wiley, ISSN: 1527-2648, pp. 2300053, Vol. 25, Issue 16, 2023, SCOPUS/ SCI / WOS/ Q1. DOI - https://doi.org/10.1002/adem.202300053
-
‘The carbon content effect on hot-rolled C-Mn micro-alloyed E410 structural steel’, Vacuum, Elsevier, ISSN: 0042-207X, pp. 112042, Vol. 212, Issue C, 2023, SCOPUS/ SCI/ WOS/ Q1. DOI - https://doi.org/10.1016/j.vacuum.2023.112042
-
‘An initial study on the impression creep behaviour of stir-cast GNP reinforced AA6061 composite (AMMC)’, IOP Conference Series: Materials Science and Engineering, (IOPScience) Publishing, ISSN: 1757-8981, pp. 012086, Vol. 1248, 2022, SCOPUS. DOI - https://doi.org/10.1088/1757-899X/1248/1/012086
-
‘Boron addition to AISI A213/P91 steel: Preliminary investigation on microstructural evolution and microhardness at simulated heat-affected zone’, Materials Science and Engineering Technology, Wiley, ISSN: 1521-4052, pp. 1167-1183, Vol. 53, Issue 10, 2022, SCOPUS/ SCI/ WOS/ Q3. DOI - https://doi.org/10.1002/mawe.202100152
-
‘The Synergistic Effects among Crystal Orientations, Creep Parameters, Local Strain, Macro-Microdeformation, and Polycrystals’ Hardness of Boron Alloyed P91 Steels’, Steel Research International, Wiley, ISSN: 1869-344X, pp. 2100819, Vol. 93, Issue 9, 2022, SCOPUS/ SCI/ WOS/ Q1. DOI - https://doi.org/10.1002/srin.202100819
-
‘A novel approach to envisage effects of boron in P91 steels through Gleeble weld-HAZ simulation and impression-creep’, The Journal of Strain Analysis for Engineering Design, SAGE, ISSN: 0309-3247, pp. 647 - 663, Vol. 57, Issue 9, 2021, SCOPUS/ SCI/ WOS/ Q2. DOI - https://doi.org/10.1177%2F03093247211061943
-
‘Effects of prior austenite grain size on impression creep and microstructure in simulated heat affected zones of boron modified P91 steels’, Materials Chemistry and Physics, Elsevier, ISSN: 0254-0584, pp. 122847, Vol. 249, 2020, SCOPUS/ SCI/ WOS /Q1. DOI- https://doi.org/10.1016/j.matchemphys.2020.122847
-
‘Effects of boron modifications on phase nucleation and dissolution temperatures and mechanical properties in 9%Cr steels: Sensitivity and stability’, Materials Research Express, Institute of Physics (IOPScience) Publishing, ISSN: 2053-1591, pp. 1265k1, Vol. 6, Issue 12, 2020, SCOPUS/ SCI/ WOS/Q2. DOI - https://doi.org/10.1088/2053-1591/ab71cd
-
‘Effects of boron modifications on phase nucleation and dissolution temperatures and mechanical properties in 9%Cr steels: Alloy design’, Materials Research Express, Institute of Physics (IOPScience) Publishing, ISSN: 2053-1591, pp. 1265k3, Vol. 6, Issue 12, 2020, SCOPUS/ SCI/ WOS/Q2. DOI - https://doi.org/10.1088/2053-1591/ab6db7
-
‘Probing true creep-hardening interaction in weld simulated heat affected zone of P91 steels’, Journal of Manufacturing Processes, Elsevier, ISSN: 1526-6125, pp. 345-356, Vol. 46, 2019, SCOPUS/ SCI/ WOS/Q1. DOI - https://doi.org/10.1016/j.jmapro.2019.08.029
-
‘Probing true microstructure-hardening relationship in simulated heat affected zone of P91B steels’, Metallography, Microstructure, and Analysis, Springer, ISSN: 2192-9270, pp. 656-677, Vol. 8, Issue 5, 2019, SCOPUS/ESCI/ WOS/Q2. DOI- https://doi.org/10.1007/s13632-019-00573-w
-
‘Evolution of microstructure during welding simulation of boron modified P91 steel’, Physics of Metals and Metallography, Structure, Phase transformations, and Diffusion, Springer, ISSN: 1555-6190, pp. 672-685, Vol. 120, Issue 7, 2018, SCOPUS / SCI/ WOS/ Q3. DOI - https://doi.org/10.1134/S0031918X19070056
-
‘Phase transformations and numerical modeling in simulated HAZ of nanostructured P91B steel for high temperature applications’, Applied Nanoscience, Springer, ISSN: 2190-5517, pp. 1669–1685, Vol. 8, Issue 7, 2018, SCOPUS/ SCI/ WOS/Q2. DOI - https://doi.org/10.1007/s13204-018-0854-1
-
‘Influence of ceramic Al2O3 particulates on performance measures and surface characteristics during sinker EDM of stir cast AMMCs’, World Journal of Engineering, Emerald, ISSN: 1708-5284, pp. 526–538, Vol. 16, Issue 4, 2019, SCOPUS /ESCI / WOS/Q3. DOI - https://doi.org/10.1108/WJE-01-2019-0015
-
‘EDM machinability and parametric optimization of 2014Al/Al2O3 composite by RSM’, International Journal of Machining and Machinability of materials, Inderscience Publishers, UK, pp. 536 – 555, ISSN: 1748-5711, Vol. 20, No.6, 2018, SCOPUS / Q3. DOI - https://doi.org/10.1504/IJMMM.2018.096380
-
‘Characterizing creep behaviour of modified 9Cr1Mo steel by using small punch impression technique for thermal powerplants’, Journal of Mechanical and Mechanics Engineering, MatJournals, India, ISSN: 2581-3722, pp. 47 –61, Vol. 4, Issue 3, 2018, Referred. DOI - https://matjournals.in/index.php/JOMME/article/view/2969
-
‘Impression creep studies on simulated reheated HAZ of P91 and P91B steels’, International Journal of Modern Manufacturing Technologies, ModTech, Romania, ISSN: 2067-3604, pp. 50 –56, Vol. 10, Issue 1, 2018, SCOPUS/Q4. DOI - https://modtech.ro/international-journal/vol10no12018/07_Khajuria_Akhil.pdf
-
‘Effect of boron addition on creep strain during impression creep of P91 steel’, Journal of Materials Engineering and Performance, Springer, ISSN: 1059-9495, pp. 4128–4142, Vol. 28, Issue 7, 2019, SCIE /WOS / Q2. DOI - https://doi.org/10.1007/s11665-019-04167-z
-
‘Microstructural investigations on simulated intercritical heat-affected zone of boron modified P91-steel’, Materials Science and Technology, Taylor & Francis, ISSN: 1743-2847, pp.1407-1418, Vol. 36, Issue 13, 2020 SCOPUS /SCI / WOS/Q2. DOI - https://doi.org/10.1080/02670836.2020.1784543
-
‘Influence of boron on microstructure and mechanical properties of Gleeble simulated HAZ in P91 Steel’, International Journal of Pressure Vessels and Piping, Elsevier, ISSN: 0308-0161, pp. 104246, Vol.188, Dec. 2020, SCOPUS/ SCI/WOS/Q2. DOI - https://doi.org/10.1016/j.ijpvp.2020.104246
Book Chapters
-
‘Investigation of impression creep deformation behaviour of boron modified P91 steel by high end characterization techniques’, Chapter 10, Lecture Notes on Multidisciplinary Industrial Engineering : In Manufacturing Engineering, 2019, Springer, Singapore (pp. 137-150), ISBN:978-981-13-6287-3 (e-book). DOI - https://doi.org/10.1007/978-981-13-6287-3_10
-
‘Effect of re-normalzing and re-tempering on inter-critical heat affected zone(s) of P91B steel’, Chapter 20, Lecture Notes on Multidisciplinary Industrial Engineering: In Manufacturing Engineering, 2020, Springer, Singapore (pp. 255-270), ISBN: 978-981-15-4619-8 (e-book). DOI - https://doi.org/10.1007/978-981-15-4619-8_20
Patents
-
NA
Articles Published
- Jignesh Doshi, Bhushan Trivedi:
-
Received best paper award (Sponsored by Springer, Paper ID - 35) at 6th International Conference on Production and Industrial Engineering (CPIE), June 8-10, 2019, NIT Jalandhar.
-
Received best paper award (Paper ID - ICSM-MEC-0003) at International Virtual Conference on Smart Advanced Material Science & Engineering Applications (3-5 December, 2020), IVCSAMSEA-2020, KL University, Guntur.
-
Worked at CSIR – National Metallurgical Laboratory (NML), Jamshedpur, India for Ph.D thesis research work on a Board of Research in Nuclear Sciences (BRNS), India Government assisted project (GAP-260, Toughness investigation of weld heat affected zones in SA 508 Class 3 and P91 steels) with Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam, India and Bhabha Atomic Research Centre (BARC), Mumbai, India as collaborators (Dec 2016 to June 2018).
-
Reviewer of 35 SCI/ SCIE/ WOS/ ESCI/ Scopus international and national journals of repute.
Books
- Fundamentals of Computers
Graduate Level
-
Fluid Mechanics-1, Theory of Machines, System Design, Industrial Automation, Production Management, Engineering Graphics, Elements of Mechanical Engineering, Basic Manufacturing Processes, CAD/CAM.
Postgraduate Level
-
Industrial Safety, Advanced Manufacturing Processes
Majors Degrees
-
Ph.D. in Mechanical Engineering – NIT Jalandhar (2015-2020)
-
Master’s (M.Tech) in Manufacturing and Automation –SMVDU, Katra (2010-2013)
-
Bachelor’s (B.Tech) in Mechanical Engineering –SMVDU, Katra (2006-2010)
Online Certified Courses
-
NA
Academic
-
Total academic experience is of 2.5 years.
Seminars/Workshop Conducted
-
NA
Seminars/Workshop Attended
-
One Week Training Program on Advanced Research Instruments on Synergistic Training Program Utilizing the Scientific and Technological (STUTI), February 6-12, 2023, Sponsored by Department of Science and Technology (DST), Govt. of India, Organized by NIT Warangal & NIT Jalandhar.
-
TEQIP-III Sponsored One Week Online STC on Microwave Material Processing: “Opportunities and Challenges”, December 14 – 18, 2020, Organized by Department of Mechanical Engineering, National Institute of Technology, Uttarakhand.
-
TEQIP-III Sponsored 5-DAYS Online STC on ‘Advances in Fatigue, Creep, Fracture and Failure Analysis of Materials’, 7-11 December, 2020, Organized by Discipline of Metallurgy Engineering and Materials Science, Indian Institute of Technology, Indore.
-
TEQIP-III Sponsored One Week Online STC on ‘Recent Advancements in Micromanufacturing’, November 23 – 27, 2020, Organized by Department of Mechanical Engineering, National Institute of Technology, Uttarakhand.
-
TEQIP-III Sponsored Online STC on ‘Advanced Energy Materials’, October 12-16, 2020, Organized by Department of Physics, NIT Jalandhar.
-
Two days FDP on ‘Pedagogical Skills for Teachers’, July 22-23, 2018, Sponsored by TEQIP-3, Organized by NIT Jalandhar.
-
TEQIP-III Sponsored STC on ‘Materials Characterization Techniques’, 17-21 June, 2019, Organized by Department of Mechanical Engineering, NIT Jalandhar.
-
TEQIP-III Sponsored One Week Winter School on ‘Recent Trends in Materials Research’, December 15th – 19th, 2017, Organized by Department of Mechanical Engineering, NIT Jalandhar.
-
TEQIP-II Sponsored Symposium on ‘Fatigue, Fracture and Integrity Assessment’, March 23-24, 2017, Organized by Metallurgical and Materials Engineering Department, Jadavpur University, Kolkatta, in association with CSIR-National Metallurgical Laboratory, Jamshedpur.
-
Workshop on ‘Trends in SMAW & GMAW’, 26-27 August, 2016, Organized by Indian Welding Society, Indian Institute of Technology, Delhi.
-
International Summer Term Course on ‘Nanotechnology: Synthesis, Characterization, Fabrication and Applications’, 6-11 June, 2016, Organized by Global Initiative on Academic Network (GIAN) MHRD, Govt. of India at NIT Jalandhar.
-
Six Days Extensive Course on ‘Applied Fatigue & Fracture Mechanics’, 16-21 May, 2016, Organized by Global Initiative on Academic Network (GIAN) MHRD, Govt. of India at Indian Institute of Technology Ropar.
-
Special Training Course on ‘Advanced Knowledge of Safety : Quality Inspection, Fatigue and Fracture Mechanics’, 18-23 April, 2016, Organized by Department of Metallurgical & Materials Engineering & Continuing Education Centre (CEC), Indian Institute of Technology Roorkee.
-
Excellence of center award from LJIET 2013
-
Main Coordinator of Renewable Center of Excellence- RECOE
-
Project of Solar Powered Tree in campus – generate power
-
Project of Oxygen concentration in campus during covid
-
Project of Roti maker with using of IOT
Contact
LJ Institute of Engineering and Technology,
LJ Campus, Near Sarkhej-Sanand Circle,
Off. S.G. Road, Ahmedabad-382210
Phone: 7096660382
Email: info_iet@ljku.edu.in